Dell PowerVault MD3000 - Manual (Page 207)

Script Commands
207
Show Physical Disk Channel Statistics
This command shows cumulative physical disk channel data transfer and
error information. If the RAID controller module has automatically degraded
a channel, this command also shows interval statistics. When using this
command, you can display information about one specific physical disk
channel, several physical disk channels, or all physical disk channels.
Syntax
show (physicalDiskChannel [(1 | 2 )] |
physicalDiskChannels [(1 | 2 ) ... (1n | 2n )] |
allPhysicalDiskChannels) stats
Parameters
physicalDisk or physicalDisks Identifies the enclosure and slot where the
physical disk resides. You can enter enclosure IDs
and slot IDs for one or several physical disks.
Enclosure ID values are 0 to 99. Slot ID values
are 0 to 31. You must put parentheses around the
enclosure ID values and the slot ID values.
summary Returns the status, capacity, data rate, product
ID, and firmware version for the specified
physical disks.
NOTE:
To determine the type of physical disk in a
specific location, use the physicalDisk parameter,
and enter the enclosure and slot IDs for the
physical disk.
Parameter Description
physicalDiskChannel Identifier number of the physical disk channel
for which to display information. Valid physical
disk channel values are 1 or 2. You must put
brackets ([ ]) around the physical disk channel
values.
Parameter Description