Dell PowerVault MD3000 - Manual (Page 206)

206
Script Commands
– Product ID
– Firmware level
• Physical disk channel information:
– Enclosure location and slot location
– Preferred channel
– Redundant channel
• Hot spare coverage
• Details for each physical disk
Depending on the size of the storage array, this information can be several
pages long. The physical disk information is also returned when you issue the
show storageArray profile command.
Syntax
show (allPhysicalDisks [physicalDiskType=
(SAS | SATA)] |
physicalDisk [ enclosureID,slotID ] |
physicalDisks [ enclosureID0,slotID0 ...
enclosureIDn,slotIDn ])
[summary]
Parameters
Parameter Description
allPhysicalDisks Returns information about all physical disks in
the storage array.
NOTE:
To determine information about the type
and location of all physical disks in the storage
array, use the allPhysicalDisks parameter.
physicalDiskType Specifies the type of physical disk for which to
retrieve information. Valid physical disk types are
SAS or SATA.
NOTE:
To determine the information about the SAS
or SATA physical disks in the storage array, use the
physicalDiskType
parameter.