Dell PowerVault MD3000 - Manual (Page 192)

192
Script Commands
NOTE:
When using this command, you can specify one or more of the optional
parameters. You do not, however, need to use all of the parameters.
Set Storage Array Enclosure Positions
This command defines the position of the enclosures in a storage array. You
must include all enclosures in the storage array when you enter this
command.
Syntax
set storageArray enclosurePositions=( enclosure-id-
list )
failoverAlertDelay Specifies the failover alert delay time in minutes.
The valid delay time range is 0 to 60 minutes.
The default value is 5 minutes.
mediaScanRate Specifies the number of days over which the
media scan runs. Valid values are: 0, which
disables media scan, or 1 to 30, where 1 is the
fastest scan rate, and 30 is the slowest.
NOTE:
Media scan runs on all virtual disks in the
storage array that have an Optimal status, have no
modification operations in progress, and have the
mediaScanRate
parameter enabled.
password Specifies the password for the storage array. You
must put quotation marks (" ") around the
password.
NOTE:
Passwords are stored on each storage
array. The password can be any combination of
alphanumeric characters, with a maximum of 30
characters.
userLabel Specifies a name for the storage array. You must
put quotation marks (" ") around the storage
array name.
Parameter Description