Dell PowerVault MD3000 - Manual (Page 193)

Script Commands
193
Parameters
NOTE:
This command defines the position of an enclosure in a storage array by the
position of the enclosure ID in the enclosurePositions list. For example, if you have
a RAID enclosure with an ID set to 84 and expansion enclosures with IDs set to 1
and 12, the enclosurePositions sequence (84 1 12) places the RAID enclosure in the
first position, expansion enclosure 1 in the second position, and expansion
enclosure 12 in the third position. The enclosurePositions sequence (1 84 12) places
the RAID enclosure in the second position, expansion enclosure 1 in the first
position, and expansion enclosure 12 in the third position.
Set Storage Array ICMP Response
This command returns the default values for negotiable settings for sessions
and connections, which represent the storage array’s starting point for
negotiations.
Syntax
set storageArray icmpPingResponse = (TRUE | FALSE)
Parameter
NOTE:
The Internet Control Message Protocol (ICMP) is used by operating systems
in a network to send error messages, such as a requested service is not available
or that a host or router could not be reached. The ICMP response command sends
Parameter Description
enclosurePositions List of enclosure IDs. The sequence of the
module IDs in the list define the positions for
the RAID enclosure and expansion enclosures in
a storage array. Valid values are 0 to 99. Separate
the enclosure ID values with a space, and put
parentheses around the list of enclosure IDs.
Parameter Description
icmpPingResponse This parameter turns on or turns off Echo Request messages.
Set the parameter to TRUE to turn on Echo Request
messages. Set the parameter to FALSE to turn off Echo
Request messages.