Dell PowerVault MD3000 - Manual (Page 222)

222
Script Commands
Parameters
NOTE:
Before issuing the show virtualDisk performanceStat command, issue the
set session performanceMonitorInterval and set session
performanceMonitorIterations commands to define how often you collect the
statistics.
Show Virtual Disk Reservations
This command returns information about the virtual disks that have
reservations.
Syntax
show (allVirtualDisks | virtualDisk
[ virtualDiskName ] |
virtualDisks [ virtualDiskName1 ...
virtualDiskNamen ] reservations
Parameters
Parameter Description
allVirtualDisks Returns performance statistics for all of the virtual disks in
the storage array.
virtualDisk or
virtualDisks Name of the specific virtual disk for which you are retrieving
performance statistics. You can enter more than one virtual
disk name. You must put brackets ([ ]) around the virtual
disk name. If the virtual disk name has special characters,
you must also put quotation marks (" ") around the virtual
disk name.
Parameter Description
allVirtualDisks Returns reservation information about all virtual disks in
the storage array.
virtualDisk or
virtualDisks Name of the specific virtual disk for which you are retrieving
reservation information. You can enter more than one
virtual disk name. You must put brackets ([ ]) around the
virtual disk name. If the virtual disk name has special
characters, you must also put quotation marks (" ") around
the virtual disk name.