Dell PowerVault MD3000 - Manual (Page 152)

152
Script Commands
Parameters
Recopy Virtual Disk Copy
This command reinitiates a virtual disk copy operation by using an existing
virtual disk copy pair.
NOTE:
Refer to "Preparing Host Servers to Recopy a Virtual Disk" on page 85.
NOTICE:
Before you create a new copy of a source virtual disk, stop any data
access (I/O) activity or suspend data transfer to the source virtual disk and (if
applicable, the target disk) to ensure that you capture an accurate point-in-time
image of the source virtual disk. Close all applications, including Windows Internet
Explorer, to make sure all I/O activity has stopped.
NOTE:
Removing the drive letter of the associated virtual disk(s) in Windows or
unmounting the vitual drive in Linux will help to guarantee a stable copy of the drive
for the virtual copy.
Syntax
recopy virtualDiskCopy target [ targetName ] [source
[ sourceName ]] [copyPriority=(highest | high |
medium | low | lowest) targetReadOnlyEnabled=(TRUE
| FALSE)]
Parameter Description
file File path and file name of a valid feature
key file. Valid file names for feature key
files must end with a .key extension. You
must put quotation marks (" ") around
the file path and file name.