Dell PowerVault MD3000 - Manual (Page 221)

Script Commands
221
Syntax
show diskGroup [ diskGroupNumber ]
importDependencies [cancelImport=(TRUE | FALSE)]
Parameters
NOTE:
This command returns the dependencies of a specific disk group, which
must be in an Exported state or a Forced state. If a decision is made to retain the
listed dependencies, then the cancelImport parameter can be enforced to spin the
physical disks back down.
NOTE:
The show diskGroup importDependencies command must be run before the
start diskGroup import command.
Show Virtual Disk Performance Statistics
This command returns information about the performance of the virtual
disks in a storage array.
Syntax
show (allVirtualDisks | virtualDisk
[ virtualDiskName ] |
virtualDisks [ virtualDiskName1 ...
virtualDiskNamen ] performanceStats
Parameter Description
diskGroup The number of the disk group for which you want to show
information. Enclose the disk group number in square brackets ([ ])
cancelImport The setting to spin the physical disks back down after the disk
group dependencies have been read. To spin down the physical
disks, set this parameter to TRUE. To let the physical disks stay
spinning, set this parameter to FALSE.