Dell PowerVault MD3000 - Manual (Page 120)

120
Script Commands
Syntax
clear storageArray firmwarePendingArea
Parameters
None.
Clear Virtual Disk Reservations
This command clears persis tent virtual disk reservations.
Syntax
clear (allVirtualDisks | virtualDisk
[ virtualDiskName ] | virtualDisks [ virtualDiskName1
... virtualDiskNamen ]) reservations
Parameters
NOTE:
You can use any combination of alphanumeric characters, hyphens, and
underscores for the names. Command names can have a maximum of 30
characters. If you exceed the maximum character limit, replace square brackets
([ ]) with angle brackets (< >) to overcome this limitation.
Create Disk Group
This command creates either a free-capacity disk group or one virtual disk on
a set of unassigned physical disks.
Parameter Description
allVirtualDisks Clears reservations on all virtual disks in
the storage array.
virtualDisk or virtualDisks Name of the specific virtual disk for which
to clear reservations. You can enter more
than one virtual disk name. You must put
brackets ([ ]) around the virtual disk
name. If the virtual disk name has special
characters, you must also put quotation
marks (" ") around the virtual disk name.