Dell PowerVault MD3000 - Manual (Page 138)

138
Script Commands
Parameters
Parameter Description
source Name of an existing virtual disk to use as
the source virtual disk. You must put
quotation marks (" ") around the source
virtual disk name.
NOTE:
You can use any combination of
alphanumeric characters, hyphens, and
underscores for the names. Command
names can have a maximum of 30
characters. If you exceed the maximum
character limit, replace square brackets
([ ]) with angle brackets (< >) to overcome
this limitation.
target Name of an existing virtual disk to use as
the target virtual disk. You must put
quotation marks (" ") around the target
virtual disk name.
NOTE:
You can use any combination of
alphanumeric characters, hyphens, and
underscores for the names. Command
names can have a maximum of 30
characters. If you exceed the maximum
character limit, replace square brackets
([ ]) with angle brackets (< >) to overcome
this limitation.