Dell PowerVault MD3000 - Manual (Page 122)

122
Script Commands
Enclosure Loss Protection
For enclosure loss protection to work, each physical disk in a disk group must
be in a separate enclosure. If you set the
enclosureLossProtect parameter to
true and have selected more than one physical disk from any one enclosure,
the storage array returns an error. If you set the
enclosureLossProtect
parameter to false, the storage array performs operations, but the disk group
that you create might not have enclosure loss protection. Enclosure loss
protection is not valid when you create virtual disks on existing disk groups.
Create Host
This command creates a new host.
NOTE:
A host is a system that is attached to the storage array and accesses the
virtual disks on the storage array through its HBA host ports. You can define
specific virtual disk-to-logical unit number (LUN) mappings to an individual host or
assign the host to a host group that shares access to one or more virtual disks.
Syntax
create host userLabel=" hostName " [hostGroup=
" hostGroupName "]
Parameters
Parameter Description
userLabel Name to give the host that you are
creating. You must put quotation marks
(" ") around the host name.