Dell PowerVault MD3000 - Manual (Page 182)

182
Script Commands
-c "set iscsiTarget <\"iqn.1984-
05.com.dell:powervault.
6001372000f5f0e600000000463b9292\"> targetAlias =
\"iscsi2902\";"
Set Physical Disk Channel Status
This command defines how the physical disk channel performs.
Syntax
set physicalDiskChannel [( 1 | 2 )] status=
(optimal | degraded)
Parameters
Set Physical Disk Hot Spare
This command assigns or unassigns one or more physical disks as a hot spare.
Syntax
set (physicalDisk [ enclosureID,slotID ] |
physicalDisks [ enclosureID0,slotID0 ...
enclosureIDn,slotIDn ]) hotSpare=(TRUE | FALSE)
Parameter Description
physicalDiskChannel Identifier number of the physical disk channel for which to
set the status. Valid physical disk channel values are 1 or 2.
You must put brackets ([ ]) around the physical disk channel
number.
status Condition of the channel. You can set the channel status to
optimal or degraded.
NOTE:
Use the optimal parameter to move a degraded
channel back to the Optimal state. Use the degraded
parameter if the channel is experiencing problems, and the
storage array requires additional time for data transfers.