AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 106)

100
4.9.5 To Setup Alarm Recording Setting:
1. Next to the Start Recording check box, click Detail.
2. In the Alarm Recording Setting dialog box, select the camera to enable/disable video recording. Enable
All to select all cameras.
3. In the Frame Rate selection, select As Setting to record the number of frames based on the Recording
Setting or Max to record the maximum of frames based on the available speed.
4. In the Stop Recording after text box, set the number in second for the program to continue recording
after the alarm has ended.
5. Click OK to accept the new settings and Cancel to exit without saving.
4.9.6 To Setup SMS/MMS Setting:
To use this feature, GSM/GPRS modem is required. Connect the GSM/GPRS modem to the serial COMM
port of PC. Beside the SMS/MMS check box, click Detail.
Select the port number in Com Port drop down list from where the GSM/GPRS modem is connected.
1. Click Modem Setup button to automatically detect the Modem Baud Rate.