AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 26)

20
3.2.1 Using Event Log Viewer
Show the record of activities that take place in the system.
i
- DVR system supports HDD failure pre-detection mechanism called HDD S.M.A.R.T. function. Once when
DVR system has detected the HDD failure possibility, an event log will be occurred and user can check it in
Event Log Viewer window.
- The HDD S.M.A.R.T. function accurate is approximately about 60%.
-
The HDD warming event log will issue once a day.
i HDD S.M.A.R.T. warning messages’ description are as following:
- HDD warning (Low risk): abnormal situations are occurred frequently but hard disk can recovery by itself.
- HDD warning(High risk): When HDD warring(Low risk) event has occurred too frequently, even though
hard disk can recovery by itself; however hard disk recovery too frequently will effect performance of hard
disk. Therefore, it is recommended to replace the hard disk.
[Note] HDD S.M.A.R.T. is an accumulation mechanism, therefore the HDD warning (High risk) event log
will issue once every day until hard disk has been replaced.
1. Click the Event Log button on DVR system main interface. The Event log viewer window will show up.
2. Select the Date to view or search certain event log by key word. Enter the key word in Find Text column
and click Search button.
3. To filter the records, select and click the select button to display Event, System, Operation, Network or
All.
4. The event list which display on the screen can be saved as text file format. To save the event list, click
Save button.
5. To view POS event log, click POSViewer bar to call out the POSViewer window (see also Chapter
3.2.1.1).
6. Click Counting Log Viewer to view object counting information (see also Chapter 3.2.1.2).
7. To view FaceFinder log, click Object Log Viewer (see also Chapter 3.2.1.3).