AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 139)

133
6.2 Familiarizing the Buttons in Remote Console
Name Function
(1) Volume Enable/disable the sound.
(2) DirectDraw Enhance the video quality.
i
Not all graphic cards can support this function.
(3) Exit Close the Remote Console.
(4) Split Screen
Mode
Select from 6 different split screen type to playback the recorded video file of all the
camera, or one camera over the other or alongside on a single screen.
i - If there are only 4 cameras, you won’t be able to switch to 9, 16, and 13 split screen mode.
- To change the video quality, right-click on the screen and select between High and Normal.
- The IWH DVR series don’t support 32-split screen display mode.
(5) Record Start/stop video recording.
(6) Emap Display the map in each area, the camera/sensor/relay location and the warning event. (see
also Chapter 3.6)
(7) Network Enable/disable remote system access. This feature allows you to access DVR server from a
remote location via internet connection.
(8) Setup Configure the Remote Console setting. (see also Chapter 6.2.1)
(9) PTZ Access PTZ control panel. Beside PTZ camera, DVR system also support mega pixel IP
camera.(see Chapter 6.2.2)
(10) Preview Switch to Preview/Advanced mode. This allows you to view live camera display.
(11) Playback Switch to Playback mode. This allows you to view the recorded video file. (see Chapter 6.3)
(12) Status Bar Display the current date, time and hard disk free space.
(13) Camera ID Show the number of cameras that are being viewed. When you are in single screen mode,
click the camera ID number to switch and view other camera.
(14) Snapshot Capture and save the screen shot either in *.jpg or *.bmp format.
(15) Event log Show the record of activities that take place in the system. To filter the records, select and
click the option button to only display Event, System, Operation, Network or POS.
(16) Auto Scan Click it to start channel auto cycle display.
(17) Full screen Use the entire area of the screen to only display the video.To return, Right click the mouse or
press ESC on the keyboard.