AVer IWH3216 Touch3216 Touch II user manual User Manual
Page 130
124
Network Setting
In the Network Setting window, click Update to accept the new settings, click Cancel to exit without saving,
and click Default to revert back to original factory settings. For the network service ports that use by DVR
server, please see Appendix A.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(1) Server Name
Assign a name for the DVR unit. Letters of the alphabet and numbers only.
(2) Transmitting Cameras
Select and click on the camera number in the Transmitting Camera section you want to make it accessible
via internet using PCViewer, Remote Console, PDA Viewer and HandyViewer (still image). To select all the
cameras, enable the ALL check box.
(3) Dynamic DNS (Domain Name System)
Enter the Domain Name and Password the user has setup when applied a DDNS. To use this feature, go to
http:/and register. (see also Appendix A). Use this service if the IP address changes
each time when you connect to internet.
(4) Remote Control Server
Enable/disable remote control from remote application (ex. CMS). Enter the remote accessing port in Port
column.
(5) Network Video Configuration
Set up the video quality and frame rate for viewing and transmitting to the remote program. Scrolling adjust
bar to set the Quality Level and Frame Rate Level.
(6) WebViewer Configuration
Activate Enable Anonymous Login to remotely access the DVR server without the need of password. The
default of WebViewer port is 80.
(7) Voice Phone
Voice Phone is a 2-Way Talk feature that allows the client and server to talk via internet using microphone.
Make sure both microphone and speakers work before using this feature. If the Talk to Web-Client is
disabled, the person in the DVR server side can only hear the voice from the client side that is when the
WebCam 2-Way Talk button is activated. (See also Chapter 7.1 #6). The default port of voice phone is 9999.
(8) Network Time Synchronization
Adjust the DVR system time same as network time server. Fill in the Time Server IP address or domain
name. Select Automatic Synchronize time to set automatic synchronize time on a daily basis.
(9) Other Configuration
- Enable Original Security Protocol
Enable new version DVR system to accept remote software with former version. For example, if