AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 42)

36
3.6.2 To Use the Emap
To use the Emap:
1.
Click Emap.
2. In the Emap screen, click the camera icon to switch on the area where the camera is located on the
map and to display the video at the upper right corner of the Emap screen. At the lower right corner of
the Emap screen, it lists all the warning message.
3. To control relay, right-click relay icon and select status (on, off, or trigger) of relay.
4. To view different Emap, click Emap number button (1 ~ 8).
5. Click X to close Emap screen.