AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 108)

102
4.9.9 To Setup CMS Setting
Next to the Send to CMS check box, click Detail. In the CMS Setting, select the camera to enable/disable
sending the video to CMS. Enable All to select all cameras. Then, click OK to accept the new settings and
Cancel to exit without saving.
4.9.10 To Setup POS Keyword Setting
1. Next to the Send to POS Keyword check box, click Detail.
2. In the POS Keyword Setting, select the camera to enable/disable scanning the keyword. Enable All to
select all cameras.
3. Enter the text below keyword text box. Click Add to include the keyword in the list. To remove, select the
word in the list and click Delete. You may only add 8 keywords. User can define the color for each
keyword. To set the color, click the color panel after next to POS keyword column and a color selection
window will pop up. Select the color that user wants and click OK.
4. Click OK to accept the new settings and Cancel to exit without saving.
Click to change color
of the word