AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 11)

5
Name Function
(10) Menu
Call out system setup menu on preview mode
Call out playback menu on playback mode
(11) USB 2.0 port
2 x USB 2.0 ports for connecting USB device, ex: USB pen drive, external hard disk,
mouse…and so on.
(12)
A functional key for multiple system control. Press to enable FN modes (The
word “FN” will show up in the left bottom corner on screen). To exit FN modes, press
again.
+ : Switch to single screen display mode
+ : Switch to QUAD display mode
+ : Switch to 9 spilt screen display mode
+ : Switch to 16 split screen display mode
+ : Switch to one single and 7 + 1 spilt screen display mode
+ : Switch to one single and 12+ 1 spilt screen display mode
+ : Enable/disable channel auto switch cycle
+ : Switch to full screen display mode. Press again to back to original
display mode.
(13) Number buttons ~
- Channel camera selection number in playback and
preview mode. For the channel over 10, press
, then press ~
- Press button can switch to different screen display
modes ( ~ ).
- Press and number button ( ~
), to set the preset position in the PTZ mode.
(14)
Adjust the PTZ lens to the position that user wants. And then, press with
number button to setup the PTZ camera preset position.
(15)
Operate the PTZ cameras automatically based on the selected camera group preset
position number.
i Without setup preset position, the preset button ( ) will not be
functional when press it. To setup preset position, please refer to Chapter 3.7.
(16) Speed + / Speed -
To speed up movement of PTZ camera lens
To speed down movement of PTZ camera lens
(17) Focus + / Focus -
To focus in PTZ camera lens
To focus out PTZ camera lens
(18) Zoom + / Zoom -
To zoom in view of PTZ camera lens
To zoom out view of PTZ camera lens