AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 68)

62
(5) Input
Select the type of video camera input you are using.
- Analog Camera
The video source is coming directly from camera that is connected to the SA Series DVR.
- Remote DVR
The video source is coming from another DVR server. In the Remote DVR dialog box, enter the server
IP, port number, user ID, password and select the camera number. If you are not sure of the server IP
and port, please check the DVR server IP address in Network setting.
i The audio of remote DVR doesn’t support on remote access application such as Remote
Console.
- IP Camera
The video source is coming from IP camera. Click Setup to enter the IP Camera Settings window.
In the IP Camera Settings dialog box, select to connect using Protocol or URL and then enter the
required info. If the IP camera IP address is available, enter the IP address at IP Camera Site column.
Or User can click Search Device to find the selected protocol of camera on the LAN network. If user is
not sure the camera is which model, click Detect Model to find the correct model of camera. If it
requires user identification, enable Authentication check box and enter ID and Password. To enable
audio, click Enable Audio check box. If you are not sure of the Protocol or URL info, please refer to the
IP camera manual or contact your IP camera local distributor. Click Save & Exit to save the setting and
leave the setup windows. Click OK to save the setting but not exit the setup windows. To cancel the
setting, click Cancel.