Iwh3216 touch ii – AVer IWH3216 Touch3216 Touch II user manual User Manual
Page 14
8
1.3.2.2
IWH3216 Touch II
Name
Function
(1) Video Loop Out(16CH)
Output the video signal to a CCTV monitor.
(2) Video In
Input the video camera signal and display it on channel 1~ 16.
(3) Audio In & Spot Monitor Inputs the audio signal to audio input device (16 channels) and two(2) spot monitor
output can display video on the Spot monitor when receive an alarm video.
i
The audio input device has its own power supply is necessary.
(4) Relay Out
Support 4 relay devices (Relay: 1A @ 125V AC/30V DC).
(5) Sensor In
Support up to 16 sensor devices.
(6) Audio output
For audio output device connection, such as speaker.
(7) MIC In
To connect the microphone.
(8) USB port
For connecting USB interface devices such pen drive, external hard disk, mouse,
keyboard…etc.
(9) LAN 1/ LAN 2 Port
For Gigabit Ethernet connection.
(10) eSATA interface
For connecting with e-SATA storage.
(11) VGA Out 1/VGA Out 2
Output the video signal to LCD monitor(dual monitor)
(12) RS485
For PTZ camera (see Appendix E) or System Controller Pro connection.
(13) RS232 port
For POS device connection.
(14) Power Plug
Connect the power cord into this port.