AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 121)

115
(6) Night View
Automatically adjust the exposure to make the image more visible especially when the site is dark. You can
only use this function when the Auto Brightness Control is enabled.
(7) Noise Reduction
Reduce undesirable video signal and improve the quality of the video.
i
Noise Reduction uses lots of CPU resource. Please use this feature only if it is really necessary.
(8) Recording Setting
- Video Size
Select the size of the video and click the  button. The higher the size, the larger the file it create.
You can also activate the Enable Deinterlace to enhance the video quality. Set the Enable
Deinterlace mode to #1, if you are capturing motionless picture and #2, if it captures lots of
movement.
- Enable Audio
Select to assign the audio channel of the selected camera. You can only assign one audio channel to
one camera source. This way you can record both audio and video.
- Quality
Adjust the video quality. The higher the value, the lower the compression level and uses more hard
disk space.
- Frame Rate
Set the number of images per second of the video to be recorded. The higher frame rate, it uses
more hard disk space.
IP Camera
Click OK to exit and save the setting and Cancel to exit without saving the setting. The setting here applies
to Remote DVR only.
(1)
(2)
(3)
(1) Camera Name
Select the camera you want to adjust the settings.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest
disa
bling it so that the system won’t detect it as video loss error.
(3) Camera Setting