AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 54)

48
Network Driver in DVR server. Follow the below steps to map the network drive.
1. Click Map Network Drive button. In the Map Network Drive windows, select the Drive and fill
in the IP address and file folder of file server or NAS on your network in Folder.
2. And then, click Finish to make the connection.
3. After connection successful, user should see the network drive on the Storage Path.
4. To disconnect the mapping network drive, click Disconnect Network Drive.
 Ping IP: Allow user to ping and trace the certain IP address of network/server device on the
network.
Audio Setting
Adjust audio volume of system.