AVer IWH3216 Touch3216 Touch II user manual User Manual
Page 60
Advertising
54
(5) Port Setting: Select the Local or Remote port to where it is connected.
Local: Select the COM port number which is connected.
Remote: Use the UDP protocol for remote connection if POS system can broadcast
to Internet. Enter the IP address of the remote station.
(6)
Setup…: Set the COM Properties. If you are not sure, please contact your POS service provider.
(7) Map to Channel: Select to which camera number to display the transaction text.
(8) Text Filter: Enter the word you want to be removed.
Advertising