AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 33)

27
Name Function
(13) Full screen Use the entire area of the screen to only display the video. To return, press the right
button of the mouse or ESC on the keyboard or click the arrow icon on the screen.
When you switch to full screen in multiple-screen mode, Left click to toggle to only
display one of the video in the multiple-screen mode or all.
(14) Event log Show the record of activities that take place in the system. To filter the records, select
and click the option button to only display Event, System, Operation, Network or POS.
(15) Bookmark Mark a reference point when previewing the recorded video file to which you may return
for later reference. You may also set it to protect the file. (See also Chapter 3.3.2)
(16) Visual Search Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second. (See
also Chapter 3.3.3).
(17) Find Next
Search for the next event or changes in the motion detector frame. You can use this
when you are using Intelligent Search or Event Search function.
(18) Event Search Search from the recorded activities that take place in the system (i.e., Sensor, Motion,
Video Loss, POS). (See also Chapter 3.3.4).
(19) Intelligent Search Search the changes in the motion detector frame (See also Chapter 3.3.5).
(20) Audio Enable/disable audio sound.
(21) De-interlace
To enhance the video quality. Set the de-interlace mode to #1, if you are capturing
motionless picture and select #2, if it captures lots of movement.
Click to exit from
full screen mode