AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 25)

19
Name Function
(15) Event log Click it to pop-up the Event Log Viewer dialog to check Event, Operation, POS (Point of
Sales), System and Network logs. You can select a desired date and a log item to show all
logs data in the table.
(16) AutoScan Click it to start Auto Scan.
(17) Full screen Use the entire area of the screen to only display the video. To return, press the right button
of the mouse or ESC on the keyboard or click the arrow icon.
When you switch to full screen in multiple-screen mode, Left click to toggle to only display
one of the video in the multiple-screen mode or all.
(18) Alarm Click Alarm Status ( ) button to view the status or advanced alarm information.
(19) Live Playback
button
If user has enabled the live playback function in System setup, the live playback icon
should be seemed on the each channel of the preview screen(see also (9) Miscellaneous
in Chapter 4.1).
Click to playback the recorded file instantly in preview mode. When the channel is in
live playback mode, the icon is . Move the mouse to the bottom of the live playback
channel, the playback tool bar ( ) will show
up. Using the playback tool bar to control the playback. Total 4 channels can be live
playback at the same time.
(20) Volume Adjust the audio volume to a proper volume.
(21) On Screen
Keyboard
If the keyboard is not available, you may use the Virtual Keyboard.