AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 144)

138
Name Function
(6) Archive Select the date on the calendar and the time from 00 to 23 to where to start playing the
recorded video file.
– Also, user can open the recorded file from certain location by click OPEN FILE
button
– Click Channel 01~ 16 and Channel 17 ~ 32 button to switch to different channel
group of playback calendar. If the DVR supports less 16 channels (include 16
channels), the channel group switching buttons are non-functional.
–
Mark Day Light Saving, the playback calendar will show the available playback
records during day light saving period.
i The numbers from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 16 represent the
camera ID. The blue colored column indicates that there is a recorded video file on that period of time.
While the red colored column indicates on where to start playing the recorded video file.
(7) Preview Switch to Preview mode.
(8) Playback Switch to Playback mode. This allows you to view the recorded video file.
(9) Status bar Display the recorded date, time and play speed.
(10) Camera ID Show the number of cameras that are being viewed. When you are in single screen
mode, click the camera ID number to switch and view other camera.
(11) Export Export includes Snapshot, Print, Output Video Clip, and Backup function.
Snapshot: Capture and save the screen shot either in *.jpg or *.bmp format.
Print: Print the screen shot.
Output Video Clip: Save the segmented file in *.mpg, *.avi, or *.dvr format (see
also Chapter 3.3.1).
Backup: Save the playback file to USB device or DVD-ROM disk(see also Chapter
4.6 Backup Setting)
(12) Segment Keep a portion of the recorded video you want (see also Chapter 3.3.1).
(13) Full screen Use the entire area of the screen to only display the video. To return, press the right
button of the mouse or ESC on the keyboard or click the arrow icon.
When you switch to full screen in multiple-screen mode, Left click to toggle to only
display one of the video in the multiple-screen mode or all.
(14) Event Log Show the record of activities that take place in the system. To filter the records, select
and click the option button to only display Event, System, Operation, Network or POS.
(15) Visual Search Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second. (See
also Chapter 3.3.3)
(16) Find Next Search for the next event or changes in the motion detector frame. You can use this
when you are using Intelligent Search or Event Search function.
(17) Event Search Search from the recorded activities that take place in the system (i.e., Sensor, Motion,
Video Loss, and POS).