AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 59)

53
4.1.1 To Set the POS Setting
4.1.1.1 General Setting
1. In the System Setting dialog box, POS section, click Setting.
2. In the POS Console Setting dialog box, click Add to set a new POS setting, Modify to change the POS
setting, and Delete to remove the selected POS setting. Click OK to save and close POS Console
Setting.
3. In the POS Mapping dialog box, click OK to accept the settings and Cancel to exit without saving the new
setting.
(1)
(2)
(3)
(5)
(7)
(8)
(4)
(6)
(1) Name: Enter a name to identify the POS.
(2) Protocol: To select the protocol, click Setting button (see Setup POS Device
)
(3) Skip first: Set the number of lines you want to be removed
(4) Start Testing: Click to test POS setting. You will see a test result on the right side of POS Mapping
window.