AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 13)

7
Name Function
(14) Mode
Switch between preview, playback, and EMap mode.
 In preview mode, user can switch between Preview, Playback and EMap
mode.
 In playback mode, user can switch between Preview and Playback mode.
 In EMap mode, user can switch between Preview and Emap mode.
1.3.2 Back Panel
1.3.2.1 IWH3216 Touch
Name Function
(1) Video Loop Out(16CH) Output the video signal to a CCTV monitor.
(2) Video In Input the video camera signal and display it on channel 1~ 16.
(3) Audio In & Spot Monitor Input the audio signal to audio input device (16 channels) and two(2) spot monitor
output can display video on the Spot monitor when receive an alarm video.
i
The audio input device has its own power supply is necessary.
(4) Relay Out Support 4 relay devices (Relay: 1A @ 125V AC/30V DC).
(5) Sensor In Support up to 16 sensor devices.
(6) MIC In To connect the microphone.
(7) USB port For connecting USB interface devices such pen drive, external USB hard disk, mouse,
keyboard…etc.
(8) eSATA interface For connecting with e-SATA storage.
(9) VGA Out 1/VGA Out 2 Output the video signal to LCD monitor(dual monitor)
(10) RS485 For PTZ camera (see Appendix E ) or System Controller Pro connection.
(11) Power Plug Connect the power cord into this port.
(12) RS232 port For POS device connection.
(13) LAN 1/ LAN 2 Port For Gigabit Ethernet connection.
(14) Audio output For audio output device connection, such as speaker.