AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 71)

65
 Direct Link by IE
Using IE browser to connect to camera and view the real time video. Click Direct Link by IE，the
IE browser will pop up and connect to camera. The video viewing interface will be varied by
different brand of camera.
i
The Video, Direct Link by IE, and Advanced Setting setup contents may be varied that
depends on the brand of IP camera supported.
(6) Noise Reduction
Reduce undesirable video signal and improve the quality of the video.
i
Noise Reduction uses lots of CPU resource. Please use this feature only if it is really necessary.
(7) Auto Brightness Control
Automatically adjust the brightness.
(8) Night View
Automatically adjust the exposure to make the image more visible especially when the site is dark. You can
only use this function when the Auto Brightness Control is enabled.
(9) Enable Deinterlace
To enhance the video quality. Set the Enable Deinterlace mode to #1, if you are capturing motionless
picture and #2, if it captures lots of movement.
(10) Object Counting
Select the two regions on the screen and the system will count the objects that appear from one selected
region to another selected region (See also Chapter 4.2.1).
i
The DVR system only supports 4 channels for object counting.
(11) FaceFinder
To setup the capture of human face image from live or recorded video(See also Chapter 4.2.2).
(12) PTZ Tracking
Enable/disable object tracking of the PTZ/IP PTZ camera (see also Chapter 4.2.3)
(13) Camera list
List all available cameras for grouping. User can drag the camera to (15) Video screen to view camera live
video.
(14) Group
User can create several camera groups for managing purpose. All cameras can be group into several
different groups (see also Chapter 4.2.4).
(15) Video Screen
Display the video of the selected camera.