AVer IWH3216 Touch3216 Touch II user manual - Manual (Page 77)

71
(6) Enable PTZ Auto Tracking: To restore PTZ tracking function after the camera has been manually
control. The PTZ tracking will stop function when user has operated the PTZ camera manually. Therefore,
user can enable this option to make sure the PTZ tracking will be restored after manually control of the
PTZ camera.
(7) Go to PTZ Preset Position: To move the PTZ camera back to the selected preset position after PTZ
camera tracking the object and the object is missing or out of the camera view.
4. Click OK to complete the setting.
5. When the PTZ tracking has been setup, user should see the PTZ tracking icon (
) on the preview
screen.
Maximum object size
Minimum object size