Welch Allyn 6000 Series Connex Vital Signs Monitor - User Manual - Manual (Page 110)

5. Position the bed sensor (sensing unit) as follows:
• horizontally under the patient's mattress
• the top surface of the sensing unit facing the mattress
• the sensing unit under the patient's chest area
• the sensing unit cable extending toward the head of the bed
6. Instruct or assist the patient to lie down in bed. Double-check the position of the
patient and the sensor (see step 5), and adjust as needed.
Note Careful placement of the sensor is key to getting quality
EarlySense measurements.
7. Wait for a first measurement.
104 Patient monitoring Welch Allyn Connex ® Vital Signs Monitor 6000 Series™