Welch Allyn 6000 Series Connex Vital Signs Monitor - User Manual - Manual (Page 127)

NIBP frame in Intervals Monitoring profile
NIBP frame in Spot Check and Triage profiles
NIBP measurement display
In all profiles, the frame can display systolic and diastolic measurements, and MAP
calculations. You can configure the default view in Advanced settings.
View indicator
Touch the NIBP frame to toggle between views.
•
NIBP view 1 displays the SYS/DIA measurements as the primary content
and the MAP calculation as secondary content.
•
NIBP view 2 displays the MAP calculation as the primary content and the
SYS/DIA as secondary content.
Buttons
The buttons on the right side of the frame enable you to do different tasks depending on
the profile you are using. The availability of functions depends on which profile is
selected. See the Profiles section for more information.
Button name Button image Description
Start/Stop The appearance and function of this button dynamically changes.
Note A process indicator appears in the NIBP frame until the
NIBP parameter has initialized.
Touch to start a manual measurement or a cycle of
automatic measurements.
Directions for use Patient monitoring 121