Welch Allyn 6000 Series Connex Vital Signs Monitor - User Manual - Manual (Page 81)

Note When the monitor is connected to a central station, the
monitor retrieves the patient list when you navigate to
the Patients tab.
c. Touch the patient's identifier (name, ID number, or location) you want to select.
Note Patient data can be sorted in ascending or descending
order by selecting the heading row and touching ▲ or
▼
. If a sort marker does not appear in a column, touch
the heading, and the ▲ appears.
d. Touch Select.
The selected patient's identifier appears on the Home tab.
Note As long as you make no change to patient type, any
displayed patient measurements remain onscreen and
are associated with the selected patient, and patient
configuration settings are retained.
2. In the Intervals Monitoring and Spot Check profiles, when patient context has
been established on the device and you want to select a different patient
(change patient context):
a. Touch the Patients tab.
The Summary tab appears.
b. Touch the List tab.
c. If the monitor is connected to the network, touch Retrieve list to update the
onscreen patient list.
The monitor retrieves the patient list from the network.
Note You can enable the monitor to retrieve the patient list
from the network in Advanced settings. When this
feature is enabled, a Retrieve list button replaces the
Add button on the List tab.
Note When the monitor is connected to a central station, the
monitor automatically retrieves the patient list when you
navigate to the Patients tab.
d. Touch the patient's identifier (name, ID number, or location) you want to select.
Note Patient data can be sorted in ascending or descending
order by selecting the heading row and touching ▲ or
▼
. If a sort marker does not appear in a column, touch
the heading, and the ▲ appears.
e. Touch Select.
The selected patient's identifier appears on the Home tab.
Note All displayed patient measurements and configuration
settings are cleared.
3. In the Continuous Monitoring profile, when patient context has been
established on the device and you want to select a different patient (change
patient context), you must end monitoring before selecting/assigning a different
patient.
Directions for use Patient data management 75