Welch Allyn 6000 Series Connex Vital Signs Monitor - User Manual - Manual (Page 83)

2. Modify the trend interval (the progression of time displayed horizontally in the table)
by using the View listbox. Trend interval options are 1, 5, 15, and 30 minutes; 1, 2, 4,
or 8 hours; and alarms only. The default trend interval is 1 minute.
Note Event data (e.g., physiological alarms, manual NIBP or
temperature measurements, Manual parameter entries) is
displayed in all trend intervals. By modifying the trend
interval to one of the longer time spans, you can filter out
non-alarming, continuous measurements between the
currently selected time intervals to focus more attention on
event data. Alternatively, you can modify the trend interval
by selecting a shorter time span to display a more
comprehensive listing of continuous measurements.
Note Event data (e.g., physiological alarms, patient movement,
manual NIBP or temperature measurements, Manual
parameter entries) is displayed in all trend intervals. By
modifying the trend interval to one of the longer time spans,
you can filter out non-alarming, continuous measurements
between the currently selected time intervals to focus more
attention on event data. Alternatively, you can modify the
trend interval by selecting a shorter time span to display a
more comprehensive listing of continuous measurements.
3. Use the scroll bar on the right to view patient measurements for any parameters that
do not fit in the display area.
4. Touch the page forward and page backward controls in the table header
to view additional measurements for this patient. The most recent measurements
appear on the right of the table, with older measurements to the left.
5. Touch Print to print the patient's record.
A Print options dialog appears.
6. Select the desired Timespan and touch Print.
Directions for use Patient data management 77