Welch Allyn 6000 Series Connex Vital Signs Monitor - User Manual - Manual (Page 231)

Guidance and manufacturer's declaration
EMC compliance
Special precautions concerning electromagnetic compatibility (EMC) must be taken for all
medical electrical equipment. This device complies with IEC EN 60601-1-2:2007.
•
All medical electrical equipment must be installed and put into service in accordance
with the EMC information provided in this document and the Welch Allyn Connex
Vital Signs Monitor 6000 Series Directions for Use.
• Portable and mobile RF communications equipment can affect the behavior of
medical electrical equipment.
The monitor complies with all applicable and required standards for electromagnetic
interference.
•
It does not normally affect nearby equipment and devices.
• It is not normally affected by nearby equipment and devices.
• It is not safe to operate the monitor in the presence of high-frequency surgical
equipment.
• However, it is good practice to avoid using the monitor in extremely close proximity
to other equipment.
Emissions and immunity information
For information about electromagnetic compatibility (EMC), see the Welch Allyn website:
http://www.welchallyn.com/apps/products/product_category.jsp?catcode=PMS
225