Welch Allyn 6000 Series Connex Vital Signs Monitor - User Manual User Manual
Page 77
•
New patient – Clears patient and location context and review data
•
Power down – Clears patient and location context and review data, and
powers down the device
•
Cancel – Retains patient data and returns to Home tab
Note
Ending monitoring deletes all patient measurement data
from the device.
d. Select the desired option and touch OK.
The Home tab appears.
e. Repeat step 1 and select the desired profile on the Profile vertical tab.
The profile change immediately takes effect.
4. When patient and/or location context are established, but no episodic or
continuous trend data has been stored:
a. Select the desired profile.
A confirmation dialog appears asking you to confirm the patient and/or location
context information or select a new patient. For example, if both patient and
location context have been established, the following options appear:
•
Same patient, same location
•
Same patient, different location
•
New patient
b. Select the desired option and touch OK.
The profile change immediately takes effect.
Note
If the device was connected to a central station while the Continuous
Monitoring profile was active, changing to any other profile disconnects the
device from the central station.
Directions for use
Profiles 71