Welch Allyn 6000 Series Connex Vital Signs Monitor - User Manual User Manual
Page 34
2. Align the cable connector with the cable connector port.
3. Insert the cable connector, pressing firmly until it clicks into place.
Connect the SpO2/RRa dual cable
Note
Monitors configured to measure acoustic respiration (RRa) require a dual
cable as shown below. The dual cable has two ports, one for the SpO2
cable and the other for the RRa cable.
1. Connect the dual cable to the device as shown in the preceding steps. (The
connector is the same as for the standard SpO2 cable.)
2. Connect the SpO2 cable to the Pulse CO-Oximetry port (the larger of the two ports
with the red background).
3. Attach the RRa patient cable to the Acoustic Monitoring port (the smaller of the two
ports with no colored background). See the dual cable manufacturer’s directions for
use for more information.
28 Setup
Welch Allyn Connex
®
Vital Signs Monitor 6000 Series™