KEYENCE DL-EP1 - Manual (Page 26)

2-10
2
Con
nect
io
n a
nd
Conf
ig
urat
io
n
- EtherNet/IP Compatible Network Unit DL-EP1 User’s Manual (GT2) -
2-4
Configuring Communication with the DL-EP1
This section describes settings for connecting the DL-EP1 to the EtherNet/IP system.
The following describes how to set communication with the DL-EP1.
„ Setting the IP address
Set the IP address with the DL-EP1 wired and with the power supplied.
By default, the IP address is not set. However, you can use the BOOTP client function
to set the IP address via Ethernet.
The following 2 methods are available for setting the IP address.
• Use the IP address setting tool (this tool can be downloaded from the Keyence
web site http://www.keyence.com).
Refer to the following setting procedures or the
"IP Setting Tool User's Manual".
• Use an IP address setting tool from other sources.
Refer to the manuals provided by the respective sources.
z Using the IP address setting tool
Here briefly describes the procedures for setting the IP address with the IP
address setting tool. For details on how to use the IP address setting tool, refer to
the
"IP Setting Tool User's Manual". You can view the "IP Setting Tool User's
Manual" from [Help(H)] of "IP Setting Tool" as the PDF file.
1
Start the IP Setting Tool.
Devices such as the DL-EP1 connected to the network and for which their IP
addresses are not set will appear.
To display the devices for which their IP addresses are set, click the [Scan
EtherNet/IP devices (A)] button.
DL-EP1 Settings