Memory, Remote, Option – Toa D-901 KR User Manual
Page 11: Help
![background image](/manuals/714314/11/background.png)
11
4.1.5. Memory
Change
Memories 1 – 16:
Makes a call from 16 preset memories.
Store
Memories 1 – 16:
Writes setting status in one of 16 memories.
Crossfade Time:
Sets the crossfade time when the currently selected preset memory is
switched over to a newly recalled one.
Names:
Changes the name of preset memory.
Power ON
Last Memory, Memories 1 – 16:
Select the preset memory to be recalled when the D-901's power is turned
on from the Last Memory or 16 memories.
If you select the Last Memory, the PC starts with the last recalled preset
number before turning off the power.
4.1.6. Remote
Connect... :
Connects the D-901 to a PC for online processing.
Disconnect:
Disconnects the C-901 from a PC for offline processing.
Note
The D-901's setting does not change while in the offline state even if it is
changed with a PC.
Bulk transmission:
Transmits data of the currently opened file to the D-901.
Bulk receiving:
Receives the D-901's data.
Auto connection:
Makes an automatic connection when the file is opened next time.
Firmware:
Displays the D-901's firmware version number. (Only valid when
connected online.)
Comm Setting (S):
Performs the COM port's communication settings.
4.1.7. Option
Security Settings... :
Performs user level settings and restricted operation settings.
External Control...
Contact input:
Sets the contact inputs of the D-981 or D-983 Remote Control Module, or
the D-984VC VCA Control Module.
Contact output:
Sets the contact outputs of the D-981, D-983, or the D-984VC.
Protect Settings:
Performs the D-901's front panel protection settings.
4.1.8. Help
About... :
Displays the D-901 PC Software version number.