Toa D-901 KR - Manual (Page 30)

30
8.5.2. NOM attenuation function settings
Click the [NOM] tab. The NOM attenuation function setting screen for all channels is then displayed.
(1)
(2)
(1) Auto-mixing group setting button [Automix Group]
Sets the auto-mixing group assignment to each channel.
Pressing this button permits groups to be selected from the pull-down menu.
This setting can also be performed on the screen displayed by clicking [GATE], [Gate All] or [Ducker]
tabs.
(2) NOM attenuation ON/OFF button [NOM On/Off]
Displays the ON/OFF setting status of the NOM attenuation function for each channel. Press this
button to determine whether (ON) or not (OFF) to use the NOM attenuation function.
(3) NOM attenuation button [NOM Attenuation]
Displays the NOM attenuation gain by means of numerical values.
If you press this button, a dialog for NOM setting is displayed,
enabling you to set the NOM attenuation gain by directly entering
a numerical value.
Setting range: 0 – 20 (0 log
10
NOM – 20 log
10
NOM)
The Up and Down buttons located on the right side can also be
used to change the value.