Toa D-901 KR - Manual (Page 69)

69
17.4. Contact Output Setting Screen
Select [Option
→ External Control... → Contact output] from the menu. The Contact Output setting screen is
then displayed.
(1) Function
Sets the function of the terminal.
The individual terminal pins 1 – 8 are initially set
to the "Preset memory 1 – 8," and other pins all
set to "Break."
• Break
Always at break.
• Make
Always at make.
• Memory
Outputs memory selection status.
• Channel On
Outputs channel ON/OFF status.
• Contact input status
Outputs input contact terminal status.
• Line input
Outputs stereo input selection status (the D-
936R or D-937SP must be mounted).
(2) Parameter
Sets the preset memory number for Memory
selection status output, input terminal number for
Contact input status output, and input number for
Stereo input selection status output.
(3) Control
No item to be set.
(4) Position
Selects the input or output for Channel ON/OFF
status output, and the slot in which the D-936R or
D-937SP is mounted for Stereo input selection
status output.
(5) Channel Contact
Selects the channel used for Channel ON/OFF
status output operations.