Toa D-901 KR - Manual (Page 65)

65
(3) Control
The method of control given to the terminal.
You can select "Make" or "Pulse" for the control
method when the function is set to channel ON.
• Make
Channels are set to ON if each terminal is
shorted to the C terminal, and to OFF if
opened.
• Pulse
Channel settings toggle between ON and OFF
as each terminal is shorted to the C terminal.
(4) Position
Selects the input or output for the input/output
volume adjustment and channel ON/OFF
settings, and the slot in which the D-936R or D-
937SP is inserted for stereo input selection.
(5) Channel Contact
Select the channel for which the input/output
volume is adjusted or channel ON/OFF settings
are performed.
17.3. Contact Input Function Assignment
17.3.1. Memory selection
Assign preset memory Nos. 1 – 16 to the terminals.
Step 1. Press each terminal's Function button to select "Memory" from the pull-down menu.
Step 2. Press the Parameter button to select the preset memory number from the pull-down menu.