Toa D-901 KR User Manual
Page 22
22
(6) Gain indication button [Gain (dB)]
Displays the gain of the selected filter point. If you press this button, a
dialog for gain setting is displayed, enabling you to set the gain by
directly entering a numerical value. (Setting range: –15 to +15 dB)
You can also change the gain in 0.5 dB units (can be changed to 0.1
dB units with the Option button) with the Up and Down buttons
located on the right side.
(7) Q indication button
Displays the Q value of the selected filter point.
Pressing this button permits setting values to be selected from the pull-down menu.
(8) Table display button
If this button is pressed, the filter control is displayed in tabular form. Press this button again to return to
the original graphic display.
(9) Filter ON/OFF button
Displays the ON/OFF setting status of each selected filter. The ON/OFF setting can be changed by
pressing this button.
(10) Frequency response display button
Shows or hides the response view (see
(11) Option button
Pressing this button causes the following pull-down menu to appear:
Scale... :
Changes the scale.
Q-Display:
The method to display Q can be changed by selecting "Value" or "Octave Band." (Only
valid for parametric equalizers.)
High Resolution: You can change the frequency step width if "Frequency" is selected, and the gain width
if "Gain" is selected.