Toa D-901 KR - Manual (Page 54)

54
12. LEVEL MONITOR VIEW
The Level Monitor View window permits monitoring of the D-901 mixer's input and output signal levels, the
current NON/Ducker priority level, and the mixer's cooling fan operating condition while a connection is being
established between the D-901 and the PC for communications. You can show or hide the view by selecting
[View
→ Level Monitor View] from the menu. However, this menu selection is only valid while the D-901 and
the PC are in communication mode.
Indicates input/output signal levels as follows:
Lights red when a signal level is over 17 dB above the rated level.
Lights green when a signal level is between –40 dB above and 17 dB below the rated level.
Extinguishes when a signal level is under –40 dB below the rated level.
Lights yellow if the compressor
reduction function is enabled.
Note
If auto-leveler mode is set for
input channels, their
corresponding indicators are
not displayed.
Displays the current Ducker
priority level for each auto-
mixing group.
Lights blue while a gate is
closing.
Displays the current NOM
attenuation function status set
for each auto-mixing group.
Displays the current cooling
fan operating condition.