Communications – Toa D-901 KR User Manual
Page 55
55
13. COMMUNICATIONS
Set the D-901 control mode to "PC CTRL" before starting communication between the D-901 and the PC.
Note: For settings, refer to the instruction manual attached to the D-901.
• Select [Remote
→ Comm Setting (S)] from the menu to display the following dialog.
(1)
(3)
(4)
(5)
(6)
(2)
(1) Auto-search button
The initial setting is set to this button.
The transmission port and the transmission rate
are automatically searched when a connection is
established with the D-901
The transmission rate is automatically matched to
that set at the connected D-901.
(2) Manual button
Select this button if the Auto-search button does
not establish connections.
You can select items at (3) Port and (4) Speed
columns.
(3) Port
You can select COM Port from COM1 through
COM256.
(4) Speed
The transmission rate can be selected from
115200, 38400, 19200 and 9600 bps.
Set the transmission rate at the D-901 in
advance, and match that of the software to it.
(5) Connection timeout
Enter the time interval (0 – 60 s) up to data
retransmission.
Entering 0 (s) disables data retransmission.
(6) A default setup is changed
When setting the current communication settings
as a default value, tick the checkbox and press
[OK] button.
The current communication setting is recalled
when creating a new data.