Toa D-901 KR - Manual (Page 23)

23
8.4. Comp/Leveler View (Compression/Auto-leveler Function Settings)
The Comp/Leveler view is displayed if you click the Comp box (when selecting Compressor mode*) or Leveler
box (when selecting Auto-Leveler mode*).
* Selection of each mode for input channel can be performed in the Comp/Leveler view.
Only the compression function is provided for output channel, while the auto-leveler function is not provided.
8.4.1. Compression function settings
The setting screens used here are examples for the input channel.
In output channel, there are no indications/settings related to the Auto-Leveler function.
(1) (2) (3) (5) (6) (7) (8) (9) (10)
Clicking the [Comp All] tab causes the setting screen for all channels set to compressor mode to appear.
(1) Mode selection button [Comp/Leveler] (Available only to input channel)
Displays the Compressor/Auto-Leveler mode. Mode selection can be performed for individual channels.
All input channels are set to compressor mode by default. Press this button to select the auto-leveler
mode, and press it again to select the compressor mode.
Note
At the time of mode selection, each parameter of compression and auto-leveler functions for the channel
returns to the initial value.
(2) Comp threshold handle
Click and drag this handle up and down to change the compression threshold level.
(3) Ratio handle
Click and drag this handle up and down to change the compression ratio.
(4)
(1)
(5)
(6)
(7)
(8)
(9)
(10)