Toa D-901 KR - Manual (Page 15)

15
Step 7. Tick the checkboxes for the crossover slope settings.
Setting status is displayed in the window on the right side of the screen.
Note
When using the template (see
p. 16 ), tick "Template" box and click the [Click] button located on the
right side of a checkbox. A dialog box for selecting the file is then displayed. If you select the file and
click the [Finish] button, the signal flow (see below) is displayed.
Step 8. Check to ensure that the setting is correct and press the [Finish] button.
The signal flow is displayed.