Toa D-901 KR - Manual (Page 21)

21
8.3. HPF/PEQ View (High-pass Filter/Equalizer Settings)
The HPF/PEQ view is displayed if you click the [HPF/PEQ] box of High-pass Filter/Parametric Equalizer.
(1) (2) (3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(Displayed in tabular form)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(1)
(1) Filter control
(2) Filter point list
(3) Filter point
Circles on the filter control window indicate operable filter points. Yellow circles refer to the selected filter
points.
: Parametric equalizer (PEQ)
: High-pass filter (HPF)
To change the frequency and gain, drag the filter point.
When a white circle is displayed on the left of the filter point, click and drag the white circle up and down.
The Q value of the selected filter point can then be changed.
(4) Filter type indication button
Displays the type of filter.
(5) Frequency indication button [Freq. (Hz)]
Displays the frequency of the selected filter point.
If you press this button, a dialog for frequency settings is displayed,
enabling you to set the frequency by directly entering a numerical
value. (Setting range: 20 – 20,000 Hz)
You can also change the frequency in 1/24 octave units (step width
can be changed with the Option button) using the Up and Down
buttons located on the right side.)