Toa D-901 KR - Manual (Page 42)

42
(7) Echo ON/OFF button [On/Off]
Displays the ON/OFF setting status of the echo function.
Press this button to enable or disable the echo function.
8.11. FBS View (Feedback Suppression Function Settings)
Clicking the FBS box of the feedback suppression function causes the FBS View to be displayed.
(Displayed in tabular form)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) Dynamic mode button [DYNAMIC Mode]
Displays the ON/OFF setting status of the dynamic mode.
Press this button to set the mode to ON or OFF.
(2) Auto start button [AUTO Start]
Auto mode is activated if this button is pressed while a connection is being established between the D-901
unit and a PC for communications.
(3) Filter number indication button [AUTO: DYNAMIC]
Displays the number of filters for auto mode and dynamic mode. You can select the number of filters from
the pull-down menu if you press this button.
(4) Clear dynamic button [Clear DYNAMIC]
Clears the setting of the dynamic mode filter and returns it to the initial status.
(5) Clear auto button [Clear AUTO]
Clears the setting of the auto mode filter and returns it to the initial status.