I/o group trim settings – Toa D-901 KR User Manual
Page 33
33
8.6.2. I/O group trim settings
Click the [Gr Trim] tab. The setting screen for the trim gain by means of fader operations is then displayed.
(1)
(2)
(1) Fader
If the channel group setting has been performed, the group trim gain for each channel can be changed
by moving the fader up and down.
(2) Group trim gain button [Gr Trim]
Displays the group trim gain set for each channel by means of
numerical values.
When channel group settings have been performed, if you press this
button, a dialog for gain setting is displayed, enabling you to set the
gain by directly entering a numerical value.
The group trim gain setting performed in this dialog corresponds
directly to the group trim gain setting shown on the [Fader] tab
screen.
Setting range: –
∞ (–70) to +10 dB